Morikusuta-HP-500-N手动高圧泵

Morikusuta-HP-500-N Manual High-Pressure Pump

The Morikusuta-HP-500 is a hand pump equipped with a pressure intensifier, capable of pressurizing up to 500 MPa. It includes a shut-off valve for pressure retention, ensuring more reliable pressure maintenance during prolonged high-pressure experiments. Due to its micro-volume discharge design, pressure regulation is easily achievable when pressurizing small-volume high-pressure containers (e.g., high-pressure optical measurement cells).

Specifications:

Maximum working pressure: 500 MPa (≈5,000 atm)

Intensification ratio: 8.4:1

Displacement capacity: Low-pressure side: 500 μl; High-pressure side: 58 μl (unloaded)

Pressure medium: Distilled water

Main material: SUS630 (precipitation-hardening stainless steel)

Dimensions: 135 W × 450 D × 150 H (mm)

Weight: 13 kg

Morikusuta-HP-500-N手动高圧泵

Morikusuta-HP-500是可加压到500MPa的带加压器的手泵。附带压力保持用的截止阀，在长时间的高压实验时压力保持更可靠。由于喷射容量被设计成微量，所以在对微容积的高压容器(例如:高压光学测量单元)加压时，压力调节很容易。

规格

最高使用圧力：500 MPa (≈5,000 大气压）

増圧比率：8.4倍

吐出容量：低圧侧500 μl、高圧侧58 μl（无负载时）  

圧力媒体：蒸馏水

主要材质：SUS630（析出硬化系不锈钢）

外形寸法：135 W × 450 D × 150 H (mm)

重量：13 kg