S-IL-082-500-07-W High Hydrostatic Pressure (HHP) System

S-IL-082-500-07-W Ultra-high pressure food processing experimental machine

1.Chamber diameter: Ø82 mm1

2.Inner diameter of product basket in cavity: Ø77 mm1

3.Length of chamber: 500 mm1

4.Length of product basket in cavity: 450 mm1

5.Total volume available in the chamber: 2 L(2.6L excluding product basket volume)

6.Working fluid: Water 2

7.Maximum working pressure: 700 MPa

8.High pressure cavity structure: closed/composite structure cavity with both ends locked

9.Operating temperature range: 4°C +90°C

10.Locking device: hydraulic system assisted operation

11.Pre-booster system: 70 MPa pre-booster pump

12.High pressure system: Supercharger, model 085/20

13.Pressurization time: 300s can be pressurized to 700 MPa

14.Charging time is adjustable: from 300s to 1500s

15.Pressure holding time: 0.1 seconds to 999 minutes

16.Decompression system: 2 stages, fully automatic

17.Pressure measurement: strain type pressure sensor

18.Pressure display/control: digital display, electronic control

19.Temperature measurement: Type 'T' thermocouple

20.Temperature probe position: fixed on the head of the high pressure cavity plug

21.Temperature display: digital display temperature error ±2°C

22.Decompression time: adjustable from 30s to 2000s

23.Product storage basket: Included

24.Heating system: Not included, a heater can be fitted to heat the system from ambient temperature to 99 ° C

25.Cooling system (optional) : Not included, optional, to cool the system to 4 ° C

26.Control logic: PLC connected to PC control

27.Floor area: 1.8m (L) x 1.5m (W) x 1.8m (H)

28.System weight: 1500Kg

29.Power consumption: 3 kW

30.Power supply: 400V 50Hz 3ph neutral ground wire

31.Compressed air: 5 barg (min) 50 Nl/cycle

32.Test: Perform stress test as required and test in accordance with functional performance system test specifications

33.Documents: test certificate, CE certificate, 1) Operation manual; 2) Maintenance instructions; 3) Final assembly drawing; 4) Spare parts list

34.Training, operation, maintenance and other training is carried out during the trial operation and installation